- How many bags of cement do I need for 1 cubic meter?
- What size gravel is best for concrete?
- Can I mix my own concrete for footings?
- Is 2 feet deep enough for fence posts?
- What is the best mix for concrete?
- What is the best sand and cement mix?
- Does adding more cement make concrete stronger?
- Do footings require rebar?
- What is the strongest concrete mix ratio?
- Can I make concrete with just sand and cement?
- How much water do you add to concrete?
- Can you pour concrete over dirt?
- Can I use fast setting concrete for footings?
- What is the correct mixture of cement and sand?
- Is fast setting concrete weaker?
- Is it cheaper to pour your own concrete?

## How many bags of cement do I need for 1 cubic meter?

In general for M25 Grade concrete, which is extensively used for RCC work, cement content of one cubic meter concrete ranges from 300 kg to 350 kg.

Each bag of cement weighs 50 kg and so 6 to 7 bags is required for M25 Grade concrete..

## What size gravel is best for concrete?

Medium crushed stone (5mm to 2cm) is ideal for use as a layer on top of a larger crushed stone foundation. The medium stones will settle into the gaps between the larger stones and provide a stable and supportive layer for concrete. Medium crushed stone is also used in most general concrete applications for buildings.

## Can I mix my own concrete for footings?

A concrete mix of 1 part cement : 2 parts sand : 4 parts coarse aggregate (by volume) should be used for footings. Concrete must be placed within half an hour of mixing. Brickwork – Place your concrete into your trench.

## Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

## What is the best mix for concrete?

In terms of the ratio for concrete, it depends on what strength you are trying to achieve, but as a general guide a standard concrete mix would be 1 part cement to 2 parts sand to 4 parts aggregates. For foundations, a mix of 1 part cement to 3 parts sand to 6 parts aggregates can be used.

## What is the best sand and cement mix?

For modern homes: 4 parts sharp sand and 1 part cement. Although anything from 3-5 parts sharp sand to 1 part sand would be acceptable for most situations. For period buildings: Lay a lime-based screed as the floor needs to breathe.

## Does adding more cement make concrete stronger?

To make the concrete stronger, add more cement or less sand. The closer you bring the ratio to an even one-to-one of sand to cement, the stronger the rating becomes.

## Do footings require rebar?

Footers must be twice as wide as wall minimum with 1/2 inch or 5/8 inch rebar in footing with 2 runs, placed in the bottom half of the footing, at least 6 inches apart and not less than 3 inches from the bottom and the sides of the footing supported on chairs. … Rebars are required in dwellings.

## What is the strongest concrete mix ratio?

Concrete is made from cement, sand, gravel and water. In making concrete strong, these ingredients should usually be mixed in a ratio of 1:2:3:0.5 to achieve maximum strength. That is 1 part cement, 2 parts sand, 3 parts gravel, and 0.5 part water.

## Can I make concrete with just sand and cement?

You cannot make concrete with only sand and cement because it requires a coarse aggregate like gravel. The stone component is the most critical, as that is what gives it its durability and strength. When mixing merely sand, cement, and water, you get a material closer to mortar.

## How much water do you add to concrete?

Water–cement ratios of 0.45 to 0.60 are more typically used. For higher-strength concrete, lower ratios are used, along with a plasticizer to increase flowability. Too much water will result in segregation of the sand and aggregate components from the cement paste.

## Can you pour concrete over dirt?

Long story short, yes you can pour concrete over dirt.

## Can I use fast setting concrete for footings?

Fast-setting concrete, all-purpose gravel, QUIK-TUBE® building form. … For structural or load-bearing applications, such as concrete footings for deck posts, or for securing any post in sandy soil, follow the steps on pages 59 to 60, using concrete forms to build the footings or set the posts.

## What is the correct mixture of cement and sand?

For general purposes, mix 6 parts sand to 1 part cement. For heavy duty projects, I was taught to mix 4 parts sand to 1 part cement, but recently, I’ve been mixing 3 parts sand to 1 part cement.

## Is fast setting concrete weaker?

Fast-setting concrete isn’t just simple and fast, it’s also durable and strong, reaching 4000 psi — or pounds of force per square inch —after a month. That’s stronger than the concrete used for foundations on most homes.

## Is it cheaper to pour your own concrete?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. … Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.